Softener Cover Removal - Pentair FOLEO 5800 XTR Installer Manual

8.5.2

Softener cover removal

CAUTION
Do not pull on the cables. Release the connectors from components by pressing on
their locking clips.
1. Unclip (3) and open the controller cover (2).
2. Disconnect the main cable wire (5).
3. Unlock the cover
4. Remove the cover (1).
5. Reverse above procedure steps to rebuild.
Ref. MKT-IM-038 / E - 22.10.2021
(1) from the slide clips
Installer manual Foleo 5800 XTR - Maintenance
(4) (one on each side of the cover).
75 / 108