Pentair FOLEO 5800 XTR Installer Manual page 88

Installer manual Foleo 5800 XTR - Maintenance
8.5.7.6 Optical sensor replacement
1. Remove the softener cover, see Softener cover removal [
2. Disconnect the wire from the motor to the optical sensor (4).
3. Release the optical sensor support
4. Release the optical sensor
5. Change the optical sensor (3).
6. Reverse above procedure steps to rebuild.
88 / 108
(1) by pushing it back and up as shown.
(3) from its support (1)
→ Page 75].
by pressing the clips (2).
Ref. MKT-IM-038 / E - 22.10.2021