Table of Contents
Advertisement
5.4.2
USB connection for field programming
The XTR features a USB port that allows you to connect a PC to the controller for field
programming and diagnostic parameter download.
Info
Field programmer software is required for field programming features. See XTR field
programmer manual for more information on using the field programmer software.
Do not remove USB cable from computer or controller while connected and
transferring.
From the format screen, press
When the USB screen appears, connect a USB cable to the USB port on the controller circuit
board (see Electrical connection [
USB cable to a PC with the field programmer software installed and follow the directions in the
XTR field programmer manual to complete the connection.
Press to
return to master settings.
5.4.3
Valve screen
From the main master settings screen press the valve button to display the valve screen.
system: Displays the system type. Type 4 (single system) is currently the only available selection.
valve: Set to 5800.
regen type: Set to softener metered delayed.
Ref. MKT-IM-038 / E - 22.10.2021
to access the USB screen.
USB
Connect the usb cable to the
control and PC and start
the field programming
application
→
Page 37] for location of USB port). Connect the other end of the
Ventil
System
Valve
Regen type
mtr.delayed
Installer manual Foleo 5800 XTR - Programming
4
5800
softener
51 / 108
Advertisement
Table of Contents
