Quick Program Guide - Pentair FOLEO 5800 XTR Installer Manual

Installer manual Foleo 5800 XTR - Programming
21 Error log
22 Advance
23 Reset
24 Non-factory
settings
25 Brightness
26 Accept
27 Cancel
5.2

Quick program guide

Info
Some items may not be shown depending on controller configuration.
Info
The controller will discard any changes and exit master settings if any button is not
pressed for five minutes.
40 / 108
• Press to show error list with date and time.
• This arrow allows you to advance through cycle steps during
a regeneration.
• Displayed in the diagnostics screen by pushing on totalizer
and peak flow buttons to reset totalizer and peak flow data,
and in master settings screen to reset parameters to factory
or non-factory settings.
• Press to save all the configuration in a custom profile.
• Displays the brightness screen, to adjust the backlight
brightness of the controller screen.
• Press to save or accept changes in controller configuration.
• Press to cancel configuration and exit to previous screen
without saving.
Ref. MKT-IM-038 / E - 22.10.2021