Installer manual Foleo 5800 XTR - Maintenance
8.5.4
Injector and injector screen cleaning
1. Remove the softener cover, see First steps [
[
→
Page 75].
2. Remove the injector cap screws (3).
3. Remove the injector cap (2).
4. Remove the seal
5. Using the injector puller (1), remove the injector (5).
Caution - material
To avoid any damage on the injector, use only the dedicated puller to remove it
6. Remove the screen (6).
7. G Clean or change the injector (5), the screen
8. Lubricate all seals with approved P-80
Caution - material
Using another type of lubricant, such as petroleum-based lubricants (Vaseline, oils, or
hydrocarbon-based lubricants) or silicone grease, may damage the valve.
9. Reverse above procedure steps to rebuild.
78 / 108
(4)
taking note of its position.
Page 74] and Softener cover removal
→
(6)
and the seal (4).
®
Emulsion lubricant only.
Ref. MKT-IM-038 / E - 22.10.2021