Table 3. Firmware Update Settings - Bogen NQ-A4060-G2 Configuration Manual

2 If the device is in Standalone mode, selecting the
the Bogen website for the latest firmware version available. If a version newer than
the one currently installed is found, it is downloaded to the appliance.
3 Alternatively, if you already have a firmware file you would like to install to the appli-
ance, select Upload Firmware
appliance. A popup screen appears that allows you to select the file that you want to
upload. You can navigate to the file's location. After you select the file, select Upload.
4 The page displays the uploaded firmware version ("New Nyquist Version") and an
Update Firmware
ance's firmware to the uploaded version.
5 If you want to return your appliance to its original factory configuration, select
Restore Factory Settings.
6 Select Reboot Appliance to restart your appliance.
Current Nyquist Version
New Nyquist Version
Update Firmware
Upload Firmware
Check for Updates
to upload the firmware file from your computer to the
button appears. Select this button if you want to update the appli-

Table 3. Firmware Update settings

Shows the version of the appliance's currently
installed firmware.
Shows the version of the firmware that has been
loaded, though not installed, onto the appliance.
Available only when a new firmware version has
been loaded onto the appliance (as specified in
New Nyquist Version).
Installs the loaded firmware. A reboot may be
required after installation.
Prompts the user to specify a firmware file, which
will then be loaded (though not installed) onto the
appliance.
Note: To obtain the firmware file for a specific ver-
sion, please contact Bogen Customer Service.
Available only when the appliance is configured
for Standalone mode.
Checks the Bogen website for the latest firmware
version available. and if it finds a version newer
than what is currently installed, downloads it to
the appliance.
Check for Updates button checks
5