Bogen NQ-A4060-G2 Configuration Manual page 15

Table 5. Configuration Settings (Standalone disabled)
Audio Distribution
Multicast #
The Configuration Settings
tion attached to the amplifier:
Port Number
Port Type
Account ID
Local Port
Username
Identifies the IP address, port number, cut level (vol-
ume), and station list used for audio distribution.
Identifies the IP address, port number, cut level (vol-
ume), and station list used for the multicast audio
stream of one (or more) zones.
tab also displays following information for each
Shows the output port of the amplifier, where 1 = A, 2 = B,
3 = C, and 4 = D.
Shows the device type to which the port connects.
Shows the SIP account (IP address) associated with the
device preceded by the extension of the device associated
with this port.
Shows the port used for SIP.
Shows the username or extension for the station associ-
ated with the port.
Device Sta-
11