Table of Contents
Advertisement
Amplifier Mute
The Amplifier Mute feature disables the output signal when the input signal registers
below a specified threshold. It operates at the hardware level, and as such, can minimize
or eliminate noise that is generated by the device itself, such as the popping sound that
can occur when the amplifier is turned on or off. However, it does not provide the sophis-
ticated control of the signal that the Noise Gate DSP effect provides, such as customiz-
able attack, decay, and hold settings.
To adjust the Amplifier Mute settings for a channel:
1
On the appliance Web UI's main page, select DSP.
2
Select the
Menu
3
From the drop-down menu, select
Note: If you want to return to the factory settings, select the
the right corner.
4
Adjust the following settings as needed:
Figure 9. Amplifier Mute Settings
button for the channel.
Amplifier
Mute.
Reset
icon that appears in
24
Advertisement
Table of Contents
