Router
Router settings allow you to specify where to output a line input signal and how much to
adjust its level. For each input, you can:
• Adjust the
Analog Input
• Enable or disable the input.
• Adjust the
Input
Gain. This adjusts the digital gain for the input.
• Route the input to one or more output channels.
• Adjust the gain per output channel.
For each output channel, you can:
• Enable or disable the output channel.
• Adjust the overall output gain, which includes all of the input signals that are routed to
that output channel.
Note: The number of output channels that appear on the Router screen depends on
whether the output channels are configured for Bridged or 2-Channel mode. For exam-
ple, if Channels A and B are in Bridged mode, then three output channels appear: A, C,
and D. If Channels C and D are also in Bridged mode, then only two output channels
would appear on the Router screen: A and C.
To adjust the router settings:
1
On the appliance Web UI's main page, select DSP.
Gain. This adjusts the electronic gain for the input signal.
Figure 20. Router
45