Table of Contents
Advertisement
Ratio
Input meter
Output meter
Comp LED
Table 11. Compressor Settings
Sets the compression ratio to be applied to the signal.
For example, if the ratio is set for 6 (6:1), the input signal
must increase by 6 dB for the output level to increase by
1 dB.
The range is 1 to 100.
Shows the strength of the input signal.
Shows the strength of the output signal, providing a
visual indicator of the effect of the compressor on the
output signal.
Illuminates when compression is being applied to the
signal.
27
Advertisement
Table of Contents
