Table of Contents
Advertisement
For example, if channels A and B and channels C and D have been placed in Single Chan-
nel Bridged Mode, then only two channels appear.
To adjust the settings for a channel:
1
On the appliance Web UI's main page, select DSP.
2
Select the
Menu
3
From the drop-down menu, select Settings.
4
For each channel, type the name that you want to display for the channel.
5
For each channel, select a color that will be used to highlight the channel.
Figure 21. Settings Parameters for 4 Channel Mono
button for the channel.
47
Advertisement
Table of Contents
