Table of Contents
Advertisement
Channels
Cut Level (dB)
Note: A maximum of 24 multicast entries is supported.
Note: Multicast Addresses should be ordered by priority, highest priority first. If multi-
ple streams are active on the same channel simultaneously, the one with the highest
priority will be played. Set the
way arrow symbols to drag entries up and down to rearrange the priorities.
Accessing Log Files
A log file records events and messages that occur when software runs, to be used when
troubleshooting the appliance. From the appliance's web-based UI, log files can be
viewed directly or exported via download to your PC, Mac, or Android device, where they
can be copied to removable media or attached to an email for technical support.
To view a log file:
1
On the appliance Web UI's main page, select Logs.
2
From the drop-down menu, select the log that you want to view.
Multiple versions of the same log, and zipped copies of the log, may be available.
Channel(s) on which the audio streams will be output.
One or more of the following values:
• Channel A
• Channel B
• Channel C
• Channel D
Specifies the cut level for the audio stream.
This can be a value from -70 to 0 dB.
The default value is -20 dB.
Note: To modify, click on the value, adjust the slider on the
popup using the cursor keys or mouse, and click the check
box button.
Tip:
To fine tune the level per channel, adjust the levels on the DSP
mixing board interface.
Sorting
switch to Enabled and drag entries using the 4-
16
Advertisement
Table of Contents
