Table of Contents
Advertisement
Restore Factory Settings
Reboot Appliance
Network Settings Tab Parameters
Network settings can be configured dynamically by the Nyquist server or manually by
using the appliance's web UI.
To manually configure network settings:
1
On the appliance web UI's main page, select Network Settings.
2
Select your desired network settings.
3
Select Save.
Table 3. Firmware Update settings
Returns the appliance to its original factory con-
figuration.
Note: This does not install the original appliance
firmware. The firmware will not be changed.
Restarts the appliance.
6
Advertisement
Table of Contents
