Figure 5. Appliance Configuration Settings (Standalone disabled)
The following table describes the
Operation is enabled for this device:
Table 5. Configuration Settings (Standalone disabled)
Get Configuration from
Server
Web Username
Emergency-All-Call
All-Call
Configuration Settings
Retrieves configuration settings (i.e., web username,
server, and local port) from the TFTP server specified in
the Network Settings (see "Network Settings Tab
Parameters" on page 6).
Displays the username of the current user.
Identifies the IP address, port number, cut level (vol-
ume), and station list used for emergency all-call
pages.
Identifies the IP address, port number, cut level (vol-
ume), and station list used for all-call pages.
tab settings when Standalone
10