4
Make desired adjustments using the controls described in Table 12, "Delay Settings,"
on page 29.
Delay (ms)
Signal LED
Clip LED
Input meter
Graphic EQ
The graphic equalizer allows you to tailor the audio signal to optimize the frequency
response of the sound system.
The graphic equalizer parameters are set per channel.
To adjust the graphic equalizer settings for a channel:
1
On the appliance Web UI's main page, select DSP.
2
Select the
Menu
3
From the drop-down menu, select
The Graphic EQ provides 16 slider knobs that can be moved between +12 dB and -12
dB. The frequency of each slider is different and range from 25 Hz to 20,000 (20k) Hz.
Table 12. Delay Settings
Sets the number of milliseconds by which the input signal
will be delayed before sending it to the output channel.
Illuminates when the input signal is present.
Illuminates when the input signal is clipping.
Indicates the strength of the input signal.
Figure 12. Graphic EQ Settings
button for the channel.
Graphic
EQ.
29