Table of Contents
Advertisement
NTP Server
TFTP Server
TFTP Server from DHCP
Table 4, Network Settings (Continued)
Identifies the IP address or the domain name of the
Network Time Protocol (NTP) Server.
Note: This field is only editable when Standalone
Operation is enabled.
Identifies the host name or IP address of the Trivial
File Transfer Protocol (TFTP) server.
The specified TFTP server can be used to automati-
cally set this device's Configuration settings via the
Get Configuration from Server button.
If TFTP Server from DHCP (see below) is set to "Yes",
this value will be auto-configured via DHCP option
66, assuming the DHCP server has been configured
to provide option 66. For details, see the documenta-
tion for your DHCP server.
Note: A TFTP server runs on the Nyquist server on
port 69 (the standard TFTP port) and the optional
Nyquist DHCP service automatically provides this
TFTP address via option 66.
Note: If this value is unspecified, the TFTP Server
from DHCP will automatically be set to "Yes", this
field will become read-only, and DHCP will be used to
configure this setting. To change this value, the TFTP
Server from DHCP setting must be set to No, which
makes the field editable.
Note: This setting is not available when Standalone
Operation is enabled.
"Yes" means the device will use the DHCP option 66
value to retrieve an address for the TFTP Server from
DHCP.
"No" means the device will ignore the DHCP option
66 value and use the manually configured value of
the TFTP Server (see above).
Note: This setting is not available when Standalone
Operation is enabled.
8
Advertisement
Table of Contents
