Connecting The System To A Gps - Raymarine STV60 Installation & Operation Instructions

Raymarine Satellite TV Antenna Systems

Connecting the system to a GPS

Your satellite TV system has a built-in GPS. If the internal
GPS doesn't operate properly, you can directly connect your
boat's NMEA 0183 GPS to the system through the ACU's
external GPS connector. To do this you will need a suitable
cable to connect your GPS system and the green 2-way ACU
GPS connector supplied with your Raymarine STV60 Satellite
TV System.
To Connect the system to a GPS
NMEA OUT (+) GROUND (-)
1. Strip back the insulation of each conductor and connect
each terminal of the 2-way connector.
2. Tighten the locking screws.
3. Connect the +ve (positive) terminal of the ACU GPS con-
nector to the NMEA OUT wire of the boat's GPS system.
4. Connect the –ve (negative) terminal of the ACU GPS con-
Figure 19 : NMEA 0183 GPS Connection
nector to the ground wire of the boat's GPS system.
5. Refit the ACU GPS connector to the rear of the ACU.
24