Table of Contents
Advertisement
Raymarine Satellite TV Antenna Systems
Setting the Antenna Parameters
It is not recommended for a novice satellite service user
to use this mode. Consult Technical Support for changing
antenna parameters.
SETUP MODE ?
YES
NO
SET SAT PAIR ?
PREV
YES
NEXT
X3
SET ANT PARAMETER
PREV
YES
NEXT
PARAM: SCAN OFFSET
PREV
YES
NEXT
40
1. Press YES to enter setup mode.
2. Press NEXT three times to enter set
antenna parameter menu.
3. Press YES to set antenna parameter.
4. Select the PARAM*.
PREV - Shows previous parameter.
SELECT - Set the displayed parameter.
NEXT - Shows next parameter.
Press ENTER to move to next screen.
5. Input the WRS LEVEL.
WRS LEVEL : 0500
-
INPUT
+
value.
the +/- buttons.
move to next digit.
6. Press YES to setup another parameter.
ANOTHER PARAMETER
YES
NO
setup mode.
7. Press YES to save the input informa-
SAVE ?
tion.
YES
NO
setup mode.
+ increases the value. - decreases the
Change the underscored digit using
Press INPUT to accept the value and
Press BACK to move to previous digit.
Press ENTER to move to next screen.
Press NO to cancel and return to main
Press NO to cancel and return to main
Advertisement
Table of Contents
