Table of Contents
Advertisement
Preparation for Transportation
The following procedures to secure the antenna shall be strictly
observed to protect it from being damaged during transportation.
1. Refer to the drawing on the right.
2. Rotate antenna left and right slowly until the limit switch is
pressed.
3. Turn the antenna by 360° to the reverse direction.
4. Insert the shipping foams on both sides of the dish to
secure the pedestal in position with the bottom radome.
5. Cover upper part of radome. Be careful not to touch the
reflector when assembling upper part of radome.
6. Pack Raymarine STV60 into the original package box.
Note: Don't rotate it quickly, or you may damage the antenna
Shipping Foam
limit system.
Bottom of the radome
Figure 28 : Preparation for Transportation
77
Advertisement
Table of Contents
