Table of Contents
Advertisement
Edit Satellite Information
It is possible to modify the existing satellite information and input new satellite
information into the ACU as well. However, this mode is not recommended for
novice satellite service users.
SETUP MODE ?
YES
NO
SET SAT PAIR ?
PREV
YES
NEXT
X2
EDIT SAT INFO ?
PREV
YES
NEXT
SAT NAME : DTV101
PREV
SELECT
NEXT
1. Press YES to enter setup mode.
2. Press NEXT twice to enter edit satel-
lite info mode.
3. Press YES to edit satellite info.
4. Set the satellite name.
PREV - Shows previous satellite name.
SELECT - Select the displayed satellite
for editing.
NEXT - Shows next satellite name.
Press ENTER to move to next screen.
5. Input the satellite name.
SAT NAME : DTV101
+ increases the value. - decreases the value.
-
INPUT
+
Change the underscored digit using the +/-
buttons.
Press INPUT to accept the value and move to
next digit.
Press BACK to move to previous digit.
6. Press ENTER to move to next screen.
SAT NAME : DTV101
Press BACK to return previous screen.
-
INPUT
+
7. Input the satellite position.
LONGITUDE 124.00 E
+ increases the value. - decreases the value.
-
INPUT
+
Change the underscored digit using the +/-
buttons.
Press INPUT to accept the value and move to
next digit.
Press BACK to move to previous digit.
8. Input the tracking frequency (MHz) and sym-
VER LOW 12598 21096
bol rate (KHz) for vertical low band.
-
INPUT
+
37
Advertisement
Table of Contents
