Raymarine STV60 Installation & Operation Instructions page 51

Setting Antenna Go Position
The antenna can be controlled manually by using the ACU.
SETUP MODE ?
YES NO
SET SAT PAIR ?
PREV YES NEXT
X10
ANT GO POSITION ?
PREV YES NEXT
GO TO AZ : ##.#
- INPUT +
1. Press YES to enter setup mode.
2. Press NEXT 10 times to enter Antenna
Go Position mode.
3. Press YES to go position.
4. Input position value for azimuth (AZ) axis.
+increases the value. - decreases the value.
Change the underscored digit using the
+/- buttons.
Press INPUT to accept the value and move
to next digit.
Press BACK to move to previous digit.
Press ENTER to move to next screen.
5. Input position value for elevation (EL) axis.
GO TO EL : ##.#
- INPUT +
value.
+/- buttons.
to next digit.
6. Press YES to move the antenna to input
GO TO POSITION ?
YES NO
Position mode.
7. Press EXIT to return to main setup mode.
AZ:###.# EL:###.#
EXIT
+ increases the value. - decreases the
Change the underscored digit using the
Press INPUT to accept the value and move
Press BACK to move to previous digit.
Press ENTER to move to next screen.
position.
Press NO to return to the Antenna Go
51