Raymarine STV60 Installation & Operation Instructions page 42

Raymarine Satellite TV Antenna Systems
Setting the LNB Local Frequency
It is possible to select a local frequency from ACU. However, this
mode is not recommended for novice satellite service users.
Case1. Single band LNB is used.
SETUP MODE ?
YES NO
SET SAT PAIR ?
PREV YES NEXT
X4
SET LOCAL FREQ ?
PREV YES NEXT
42
1. Press YES to enter setup mode.
2. Press NEXT four times to enter set
local frequency mode.
3. Press YES to set local frequency.
4. Select the LNB Type* - SINGLE.
LNB TYPE : SINGLE
PREV SELECT NEXT
5. Input the local frequency of LNB.
LOCAL FREQ: #####MHz
- INPUT +
6. Press YES to accept the data.
SAVE ?
YES NO
PREV - Shows previous LNB type.
SELECT - Set the displayed LNB type.
NEXT - Shows next LNB type.
Press ENTER to move to next screen.
+ increases the value. - decreases the value.
Change the underscored digit using the +/-
buttons.
Press INPUT to accept the value and move to
next digit.
Press BACK to move to previous digit.
Press ENTER to move to next screen.
Press NO to cancel and return to main setup
mode.