Raymarine STV60 Installation & Operation Instructions page 44

Raymarine Satellite TV Antenna Systems
Setting the DiSEqC Method
DiSEqC selection can be made from ACU. However, this
mode is not recommended for novice satellite service users.
SETUP MODE ?
YES NO
SET SAT PAIR ?
PREV YES NEXT
X5
USE DISEQC ?
PREV YES NEXT
44
1. Press YES to enter setup mode.
2. Press NEXT five times to enter DIS-
EQC mode.
3. Press YES to use DISEQC.
DO NOT USE DISEQC
PREV SELECT NEXT
SAVE ?
YES NO
DiSEqC Method*
DO NOT USE DISEQC - DiSEqC is not being used.
USE TO CHANGE BAND - DiSEqC is being used to change to low and high band.
USE TO CHANGE SAT - DiSEqC is being used to change tracking satellite.
4. Select the DiSEqC Method*
PREV - Shows previous DiSEqC Method.
SELECT/ENTER - Set the displayed DiSEqC
method.
NEXT - Shows next DiSEqC Method.
Press ENTER to move to next screen.
5. Press YES to accept the selection.
Press NO to cancel and return to main
setup mode.