Raymarine STV60 Installation & Operation Instructions page 54

Raymarine Satellite TV Antenna Systems
CODE*
CODE 101 Data communication between antenna and antenna control unit
is tested. If failed, check the RF cable.
CODE 102 AZ CW limit is tested.
If failed, check the limit sensors, motor and belt for AZ axis.
CODE 103 AZ CCW limit is tested.
If failed, check the limit sensors, motor and belt for AZ axis.
CODE 104 EL axis is tested.
If failed, check the limit sensors, motor and belt for EL axis.
CODE 105 Sub reflector is tested.
If failed, check the sub reflector.
CODE 106 LNB is tested.
If failed, check the LNB and control board.
54
CODE 107 Skew System is tested.
if failed, check the control board, skew motor, and skew
sensor.
CODE 108 Antenna Input Power is tested.
If failed, check the RF cable.
CODE 109 ACU Power is tested.
If failed, check the ACU power cable and Input DC power.
CODE 110 Receiver Power is test to receiver cable and receiver
power.
RESULT • Test is passed.
STATUS - Test is skipped.
? Test is under processing.
Number refers to an error code
(••3••• -•••) 3 means error code 103.