Table of Contents
Advertisement
5. Monitor
This view provides a user interface which can monitor all
data that has been received from the ACU.
- Tracking: not used on STV series.
- Rate Sensor Bias: not used on STV series.
- Tilt Sensor Bias: not used on STV series.
- Show Param: shows the current antenna parameters.
- Check NID: verifies the NID (network ID) of the current
tracking transponder. Press the NID button to obtain the NID
only if the antenna is locked onto the desired satellite.
- Start Debug: starts the debug log of the antenna. The
debug message will be displayed once the debug button is
pressed.
- Stop Debug: stops debug logging of the antenna.
- Save Debug (Start/Stop): starts or stops saving the debug
log. This button is enabled once the Start Debug button is
pressed.
- Clear View: clears the debug message or log data in
monitoring window.
71
Advertisement
Table of Contents
