Table of Contents
Advertisement
Marking the Antenna Mounting Position
Referring to the mounting template, mark where the antenna
will be mounted onboard (it must be a flat surface) or on a
separate "power tower", by drawing a square of 30.4 cm (12")
Note: If a "power tower" is not suitable to mount the antenna,
separate cable shock and waterproofing measures must be
taken to protect the RF connector from being exposed to the
sea water and external shocks. An exposed cable may cause
electric shock and cause serious damage to the equipment.
30.4 cm (12")
Figure 10 : Mounting Hole Position of STV60
17
Advertisement
Table of Contents
