Raymarine STV60 Installation & Operation Instructions page 23

Multi-Receiver Connection
In order to connect multiple receivers to the antenna, you
will need to purchase a suitable active multiswitch. The
multiswitch has to be installed between the antenna unit and
the receivers as shown in the following diagram.
RF 1 RF 2
RF 4
RF 3
RF Cable
Antenna
ACU
NMEA
connection
(e.g. GPS)
DC Power Cable
Receiver 1 Receiver 2
(Not supplied) (Not supplied)
Figure 18 : Multi Receiver Connection
ACU Receiver Cable
Receiver
Multi switch
(Not supplied)
PC Cable
Receiver 3 Receiver 4
(Not supplied) (Not supplied)
23