Table of Contents
Advertisement
Raymarine Satellite TV Antenna Systems
Work View Tabs
Aptus® provides 7 Work View Tabs (Antenna Basic View, Antenna
Advanced View, Satellite View, Monitor View, Graph View,
Diagnostic /Network View, and GUI View) to manage the Antenna
and the Satellite configuration.
How to modify the settings on Work View;
1. Enter the Setup mode by clicking Setup icon.
2. Tick the checkbox next to the "Set" button to modify the
settings.
3. Enter the desired value then press the Set button to save the
settings.
1. Antenna – Basic Info.
This view tab provides information on the Antenna's Current GPS
location, Skew Information, and the Antenna's Angle. This view
tab uses the Antenna's AZ and EL information in order to provide
a dynamic graphic user interface (UI).
66
- GPS: displays and sets current antenna's GPS.
- Bow Information: not used on STV series.
- Go to Position: The current position (angle) of the antenna is
displayed.
Push the "Go to Target Position" button after keying in the
desired angle to move the antenna to target position.
- Find Antenna Angle: displays and sets the current antenna
angle. Select a desired satellite from the drop-down menu, then
longitude, azimuth, elevation and skew information are displayed.
• Find Angles & Skew Antenna GPS: finds the current
antenna angles and skew angle in relation to the longitude (orbit
position) of the antenna's current GPS.
Advertisement
Table of Contents
