Raymarine STV60 Installation & Operation Instructions page 69

Table of Contents

Advertisement

- Dual Satellite Mode / Triple Satellite Mode: Registers the
target satellite.
• Pushing 'Register for Sat A' or 'Register for Sat B' button
after selecting the satellite in the list box makes it possible to
register A or B in Dual Satellite Mode.
• Pushing 'Register for Sat A' or 'Register for Sat B' or
'Register for Sat C' button after selecting the satellite in the
list box makes it possible to register A or B or C in the Triple
Satellite Mode.
• Transponder information consists of frequency, symbol
and NID (Network ID) of a transponder in tracking the
satellite. There are four groups of transponder information.
'Vertical/RHCP' is applied when the receiver supplies 13V,
and 'Horizontal/LHCP' is applied when the receiver supplies
18V. 'LOW' is applied when DiSEqC signal is not detected
from receiver. 'HIGH' is applied when the DiSEqC signal
is detected from the receiver. After modifying information,
press the 'Edit Satellite Information' button, then new
information is updated in the antenna.
- Pol & Band Control: The "Pol" controls 13V (Vertical/RHCP
band) or 18V (Horizontal/ LHCP band). The "Band" controls
DiSEqC 0KHz tone (Low band) and 22KHz tone (High band).
After modifying information, press 'Edit Satellite Information'
button, then new information is updated in the antenna.
- Triple Satellite Mode: To select between Dual-Sat mode
and Triple-Sat mode, tick the 'Triple Satellite Mode' box at the
bottom of the screen.
- Edit Satellite Information: push the "Edit Satellite
Information" button to update the information after modifying
values.
- Load Default: Push the "Load Default" button to select a
regional library file *.rif according to your region.
- Update Default: After loading a regional library file *.rif,
push the "Update Default" button to update the system.
- Diseqc: When the operation method of DiSEqC is selected
to "Change Band", DiSEqC may be used for updating the
local frequency and to "Change Satellite", for updating the
target satellite.
69

Advertisement

Table of Contents
loading

Table of Contents