Table of Contents
Advertisement
Raymarine Satellite TV Antenna Systems
Dual Receiver Connection
You can connect 2 receivers for your antenna as shown in
the following diagram. However, only one of the receivers
can be configured as a 2 satellite receiver.
The other receiver needs to be configured as a single
satellite receiver. The 2 satellite receiver determines which
satellite is tracked, while the other receiver can watch any
channel which is available from the tracked satellite.
As in the single receiver option, the RF cables from the
antenna base plate should be connected to 'LNB', 'ANT', or
'Satellite In' on the rear panel of the receiver.
22
RF 1
RF 2
RF Cable
Antenna
ACU
DC Power Cable
PC Cable
NMEA
connection
(e.g. GPS)
Figure 17 : Dual Receiver Connection
Receiver 1 (Not supplied)
ACU Receiver Cable
Receiver 2 (Not supplied)
Receiver
Advertisement
Table of Contents
