Table of Contents
Advertisement
Sequential Broadcasting to More Than One
Location
Follow this procedure to scan a document once and send it to several
locations. With this sending method, called sequential broadcasting, you
can send the same document to a maximum of 210 locations.
If you frequently send the same document to several locations, use
Group Dialing. With Group Dialing you can register up to 199 facsimile
numbers and send the same document to these numbers at the press of
only one or four buttons. (➞4-24)
If you use sequential broadcasting frequently and you want to make sure
that all transactions are completed, assign the REPORT function to the
Program
the fax unit print a Multi-transaction Report to confirm that the
document was sent to all the destinations. (➞12-5, 14-14)
1. Set the document on the fax. (➞6-3)
2. Dial the telephone numbers by entering the numbers one right
1
72
Coded Dial
0
0
0
1
2
7
6-22
Sending Documents
button. Then before you send a document, press
Set the document resolution, contrast, and document type. (➞6-4)
You can also select a sender's name with the
after the other.
Following are the three methods you can use to enter the numbers
for Sequential Broadcasting:
Use the One-touch Speed Dialing buttons to dial up to 72 destina-
tions.
TEL =
01 CANON INC
Use the Coded Speed Dialing buttons to dial up to 128 destina-
tions.
TEL =
002 CANON INC CA
*
TTI Selector
123 4567
123 4567
to have
Program
. (➞6-6)
Chapter 6
Advertisement
Table of Contents
