2. UNIT TELEPHONE # Register your fax number. (➞3-14) This setting is required
3. UNIT NAME
4. SENDER'S NAME
5. TX TERMINAL ID
ON
OFF
6. DENSITY CONTROL Adjust the scanning density from 1-5 for DK (2 is default),
Chapter 16
in the United States.
Register your name or company name. (➞3-15) In the
United States, you are required to enter your name or
company name.
Register up to 19 alternate sender names. Before you send
a document, press the
to replace the name you registered for 3.UNIT NAME.
(➞3-18)
Print your ID (transmitting terminal ID) on each page you
transmit. (➞3-12) In the United States, this setting must be ON.
After you turn the terminal ID ON, you can do the follow-
ing settings.
1.TTI POSITION
OUTSIDE IMAGE Terminal ID prints outside the
INSIDE IMAGE
2.TELEPHONE # MARK You can prefix your number
FAX
TEL
No terminal ID is printed on the pages you send.
2-6 for STD (4 is default), 3-7 for LT (6 is default).
button and select a name
TTI Selector
image border.
Terminal ID prints inside the
image border.
with the abbreviations FAX or
TEL in your sender ID.
Prefixes the number with the
abbreviation FAX.
Prefixes the number with the
abbreviation TEL.
Summary of Important Settings
16-5