Canon 3170 Series User Manual page 370

4. Rock the new cartridge five or six times to distribute the toner
evenly inside the cartridge.
5. Place the cartridge on a flat, clean surface.
6. Snap the tab to detach it from the cartridge.
7. As you steady the cartridge with one hand, remove the seal by
gently pulling the plastic tab with your other hand.
Use a firm, even pull to avoid breaking the seal.
• Do not pull the tab upwards or downwards; the tape may break.
• If the tab breaks off from the tape, pull the tape out by pulling on the
end of the tape where the tab was originally attached.
• Wash off any toner from your hands or clothing immediately with cold
water.
Chapter 15
PULL STRAIGHT OUT
Maintenance & Frequently Asked Questions
15-19