Table of Contents
Advertisement
Using the Menus and Buttons
This section provides a brief overview on how to use the menu buttons
to open menus, make selections, and register data.
General Guidelines for Registering Information
Always keep these points in mind while you are using the menus:
❏
If you pause and do not press a button for 60 seconds, the fax returns
to the standby mode automatically. You must then start the proce-
dure again from the beginning.
❏
If your fax is set to manual receiving and the fax rings while you are
registering information, pick up the handset. If you hear a slow beep
tone, the other party is trying to send you a document. Press
and press
Using the Menus
The fax employs a menu system you can use to register important
information or to set up important features. Here we describe how to
display and operate these menus. The content and purpose of each menu
is described in another chapter. (➞16-3)
1. Open all three of the One-touch Speed Dialing panels so you can
see the operation panel buttons.
Data
2. Press
Registration
Set
3. Press
Chapter 3
to receive the document.
Start/Scan
.
Data Registration
REGISTRATION
1.DATA REGISTRATION
.
Set
DATA REGISTRATION
1.USER SETTINGS
Stop
3-5
Getting Started
Advertisement
Table of Contents
