Table of Contents
Advertisement
7. PROGRAM KEY
PRINT REPORT
REPORT
SCANNING MODE
STAMP
8. OFFHOOK ALARM
ON
OFF
9. VOLUME CONTROL Adjust the volume of the fax unit.
1. KEYPAD VOLUME 1 (0 to 3)
2. ALARM VOLUME
10.TEL LINE TYPE
TOUCH TONE
ROTARY PULSE
16-6
Summary of Important Settings
Use the program button to streamline the procedures for
printing activity reports or doing the scanner settings. (➞12-5)
Press the
button whenever you need a transmis-
Program
sion report for a document you are sending.
If you select this setting, you do not have to open all three of
the One-touch Speed Dialing panels to start printing a report.
Whenever you need to print a report, press the
button.
Set the scanner buttons (Resolution, Contrast, Document
Type) for special settings, like sending a photograph for
example. Then you can adjust all the settings just by
pressing the
Program
If you have installed the optional stamp feature, this
option is available. If you select STAMP you can turn the
stamp feature on or off without opening all three of the
One-touch Speed Dialing panels to press the
Turn the off hook alarm off or on, which alerts you if the
optional handset is not in the handset cradle.
Offhook alarm sounds if optional handset or extension
telephone is left off the hook.
No offhook alarm.
1 (0 to 3)
Set the telephone line type. (➞3-10)
The telephone line is set for touch-tone dialing.
The telephone line is set for rotary pulse dialing. If you
need to dial into an information service that requires tone
dialing, use the
Tone
(➞12-3)
button.
button on the operation panel.
Program
button.
Stamp
Chapter 16
Advertisement
Table of Contents
