Chapter 3 Getting Started - Canon 3170 Series User Manual

This chapter describes some important settings that you should perform
before you use the fax.
Regarding the settings needed to use the fax as a printer, refer to the
Printer User's Guide. To use the LASER CLASS
the PCL6 Printer Board needs to be installed.
Before you use the fax you should set the correct date and time, register
the fax unit telephone number, and register the unit name (your personal
name or a company name). If these tasks have been done for you, then
you may want to enter your own sender name. (➞3-18)
First, we will describe the operation panel buttons and give a brief
introduction to the basic procedures for browsing through the menus
and finding the items you want. Then we will guide you step by step
through the basic procedures that must be performed before you use the
fax for the first time.
❏
Operation Buttons (One-touch panels closed) ...................................... 3-2
❏
Operation Buttons (One-touch panels open) ........................................ 3-4
❏
Using the Menus and Buttons ................................................................. 3-5
• General Guidelines for Registering Information ............................ 3-5
• Using the Menus ................................................................................. 3-5
• Entering Names for Registration ...................................................... 3-7
• Menu Button Summary Table ............................................................ 3-9
❏
Checking and Setting the Telephone Line ........................................... 3-10
❏
Registering Required Sender Information .......................................... 3-12
• What is Sender Information? ........................................................... 3-12
❏
Registering the Sender Information (TX TERMINAL ID) ................ 3-13
❏
Registering Sender Names .................................................................... 3-18
• Registering a Sender Name ............................................................. 3-18
• Changing or Erasing a Sender Name ............................................. 3-20
❏
Using the Energy Saver Mode
(For the LASER CLASS
• Turning the Energy Saver Feature ON ........................................... 3-21
• Returning to the Full Power Mode ................................................. 3-23
Chapter 3
Getting Started
®
®
3170/3175 Only) .......................................... 3-21
Chapter 3
3170/3175 as a printer,
3-1
Getting Started