Routing The Cable In The Swivel Arm - Siemens MAMMOMAT 300 Repair Instructions
Hide thumbs
Also See for MAMMOMAT 300:
- Installation and start-up instructions manual (93 pages) ,
- Parts replacement (20 pages)
Table of Contents
Advertisement
4 - 12
•
Secure the cable with cable ties.
•
In the WING: install the harness securely with screw-mounted cable ties .
Fig. 16
Routing the cable in the swivel arm
•
Install and connect the fan.
•
Install the compression unit and secure it with screw #3 (refer to Fig. 2-5) (do not tighten
the screw yet).
•
Tilt the compression unit slightly forward.
•
Install connectors X872, X873 and X874.
CAUTION
•
Reinstall the rubber bellows over WING 1 / WING 2 (refer to Pos. 7 in Fig. 2 - 8) with the
screws.
MAMMOMAT 300 / 3000
X892, X884
Wing 2
X893
X891, X883
Ensure that X874 does not collide with the measurement device
for stereo positioning (light barriers for measuring the +/- 10° tilt
of the tube.)
Register 5
RXB7-230.091.05
Rev. 03
Installing the cable harness
X857, X858
X869, X870
X893
Wing 1
Page 12 of 14
07. 98
TD SD 24
4
Siemens AG
Medical Engineering
Advertisement
Table of Contents
