Machine Head Connection To Efka Dc1550/Da321G - Dürkopp Adler 52 i Series Operating Instructions Manual

90
7.4 Machine head connection to Efka DC1550/
DA321G
Pic. 41: Machine head connection to Efka
①
②
③
(1) - Connector B2
(2) - Connector B18
(3) - Connector - machine head
1. Connect the machine head connecting cable to the
connector (3).
2. Connect the control panel to the connector (4).
3. connect the position sensor connector in the motor to the
connector B2 (1).
4. Connect the motor connector to the connector (6).
5. Connect the set value sensor to the connector (5).
6. Connect the proximity switch to the connector B18 (2).
Operating Instructions 52Xi, 52Xi-75 - 00.0 - 10/2021
Electrical connection
(4) - Connector - control panel
(5) - Connector - set value sensor
(6) - Connector drive
⑥
⑤
④