Dürkopp Adler 52 i Series Operating Instructions Manual page 76

74
Pic. 28:
Completing the table top
⑧
⑨
⑩
(8) - Yarn stand
(9) - Support blinds
(10) - Rubber hinge bottoms
12. Mount the yarn stand (8) according to the picture, insert it into
the hole in the table top and fix it with a nut with washer.
13. Fix the support blinds (9) for machine Classic or the support
blind (9) and support pin (11) for machine Eco.
14. Stick rubber hinge bottoms (10) and rubber corners (12) with
a suitable contact glue. Stick horizontal fitting surfaces of the
hinge bottoms only. You can also fix the hinge bottoms by
means of wood screws which must be then screwed down so
deep so that there is no contact of the wood screws and the
machine head.
Operating Instructions 52Xi, 52Xi-75 - 00.0 - 10/2021
2
(11) - Support pin
(12) - Rubber corners
Setup
⑫
⑪