Motor Integrated On The Machine Head - Dürkopp Adler 52 i Series Operating Instructions Manual

Setup
Operating Instructions 52Xi, 52Xi-75 - 00.0 - 10/2021
6.7.1

Motor integrated on the machine head

Pic. 31: Motor integrated on the machine head
①
②
③
④
(1) - Machine head
(2) - Screw
(3) - Screw
(4) - Prop
1. Tilt the machine head (1) slightly and insert it into the slot in
the table top.
2. After inserting the machine head (1) into the inserts (5) /tilt
position/ loosen the screw (3) and slide the prop (4) up to
a stop and tighten the screw (3).
3. Partly screw two screws (7) in the machine head (1).
4. Fix the belt cover (6), screw the screw (2) and slightly tighten
all fastening screws.
(5) - Insert
(6) - Belt cover
(7) - Screws
⑦
⑥
⑤
79