Assembling Of Control Panel - Dürkopp Adler 52 i Series Operating Instructions Manual

Setup
Operating Instructions 52Xi, 52Xi-75 - 00.0 - 10/2021
6.8

Assembling of control panel

Pic. 33: Assembling of control panel - machine with short arm
(1) - Control panel
(2) - Screws
The illustrated control panel (1) has Efka V810 marking. Also
a more comfortable panel V820 can be mounted on the same
holder. In the equal way will be mounted also the panel OP1000
of the DAC drive (picture in the spare parts list).
1. Screw out two screws (2) and subsequently screw by them
the holder (3).
2. Screw the panel (1) on the holder (2) and pull its cable under
the table top and subsequently through the cable canal to the
motor control.
(3) - Control panel holder
①
②
③
81