Dürkopp Adler 52 i Series Operating Instructions Manual page 90

88
9. Gradually push the terminal openers (5) with a small screw-
driver until the terminals (2) and (3) open.
10. Connect the blue wire to the terminal (2) and brown wire to
the terminal (3).
11. Screw the front plate back again.
12. Fix the lighting transformer cable against plucking out (e.g.
with a stick tape to the network supply cord).
The machine is equipped DAC control
Pic. 39: DAC control
(1) - Connector
1. Pull out the net plug from the electric socle!
2. Unscrew the power supply cover on the control box.
3. Screw the light power supply to the terminal board
(connectors L, N).
4. Screw the power supply cover back.
Operating Instructions 52Xi, 52Xi-75 - 00.0 - 10/2021
Electrical connection
① ②
(2) - Connector N