Dürkopp Adler 52 i Series Operating Instructions Manual page 74

72
6.4 Table top
Ensure that the table top has sufficient load-bearing capacity and
strength. If you want to make your own table top, use the dimen-
sions given in the diagram z Appendix ( p. 107), as template.
Drawings for completing the table top are also available in
the Appendix ( p. 107).
Pic. 26: Completing the table top 1 - machine with short arm
①
②
(1) - Table top
(2) - Drawer
(3) - Set value sensor
(4) - Oil pan
1. Turn the table top (1) upper side down.
2. Screw the drawer (2).
3. Set the oil pan (4) so that the oil tray inside aligns with the
recess in the table top and screw it.
4. Screw micro-switch (if there is any).
5. Screw the motor control box (6).
6. Screw the set value sensor (3).
7. Screw the lighting transformer (5) - the lighting 2-LEDs.
Operating Instructions 52Xi, 52Xi-75 - 00.0 - 10/2021
③ ④
(5) - Transformer
(6) - Control box
(7) - Cable canal
Setup
⑦
⑥
⑤