Dürkopp Adler 52 i Series Operating Instructions Manual page 59

Operation
Operating Instructions 52Xi, 52Xi-75 - 00.0 - 10/2021
Pic. 19: Puller 2
(3) - Button - Puller
Setting and function
• Puller is lowered/raised by pushing the button (3).
• If the mode for automatic raising of the Puller is set to option 3
then the following applies:
• If the presser foot is lifted with lowered Puller (by pedal in
position 1), then the Puller is raised
• If manual backtack is activated with lowered Puller, then
Puller is raised during manual backtack. After manual
backtack is Puller lowered.
• In end backtack or thread trimming process is Puller
raised.
Parameter table
DAC Classic
parameter
t 51 22 - 8
t 11 00 - 5
t 14 00
Function
Activate function module "Puller raise/lower"
Mode for automatic Puller raising
0 = do not raise
1 = wit presser foot lift
2 = during backtacking
3 = during backtacking and when presser foot is
lifted
③
57