Figure 2-15. Indoor Ont Mounting - ADTRAN Total Access 374 Installation And Maintenance Manual

Total Access 374 4-POTS, 4-GigE MDU ONT Installation and Maintenance Guide
Ground this wire to an external
ground source.
4. Secure the ONT to the Mounting Bracket by tightening the Captive Mounting Screw at
5. Connect the Ground Wire per Local Electrical Codes.
6. Attach the Ground Wire to the Mounting Bracket as shown. Route the Ground Wire that
7. Refer to the call out in
2-24

Figure 2-15. Indoor ONT Mounting

the bottom of the ONT.
is attached to the Mounting Bracket through the cut out in the housing as shown
2-16.
Figure 2-16
accompanied the mounting bracket.
and connect the Ground Wire using the hardware that
Captive Mounting
Screw
Figure
61287703G1-5B