ADTRAN Total Access 301 Manual

Product P/N: 1287564G1
Documentation for ADTRAN Carrier Networks products is available for
viewing and download directly from the ADTRAN Support Community
website.
Go to: https://supportforums.adtran.com/welcome
Registration is required.
ADTRAN offers training courses on our products, including customized
training and courses taught at our facilities or at customer sites.
For inquiries, go to: http://adtran.com/training
D
ESCRIPTION
The Total Access 301 Single, Gigabit Small Form Factor ONT (P/
N 1287564G1) is an Optical Network Termination (ONT). The
following is an illustration of the Total Access 301 Small Form
Factor ONT.
F
EATURES
The Small Form Factor ONT has the following features:

Single GPON fiber interface with 1.244 Gigabits per second
Upstream and 2.488 Gigabits per second downstream

10/100/1000-BaseT Ethernet Interface

AC Power Adapter

SC/APC Fiber Connector (located behind the protector panel
labeled "Fiber Port". Refer to
page 2 for installation information.
Ethernet Interface
The Small Form Factor ONT supports data service through one
10/100/1000Base-T Ethernet interface via an RJ-45-style
connector.
Power
The power feed is a +12 VDC from the included AC to DC
Adapter. The total power consumption is approximately 5 watts.
Total Access 301
Single, Gigabit
Small Form Factor ONT
The following documents provide additional information for this product:
Total Access 5000 GPON OLT User Interface Guide
Total Access Series 5000 Fiber to the Premises Deployment Guide
Total Access 5000/5006 Engineering and Ordering Guide
"Step 3: Connect Fiber" on
Fiber
Fiber is supplied to the Small Form Factor ONT using an SC/APC
Fiber connection located behind a removable protective panel.
I
NSTALLATION
Before installing the Small Form Factor ONT, inspect it for
damage. If damage has occurred during shipping, file a claim
with the carrier and then contact ADTRAN. For more infor-
mation, refer to the warranty.
Installation Guidelines
The following are guidelines for this installation.
!
WARNING
Read all warnings and cautions before installing or servicing the
Small Form Factor ONT.
Resetting the ONT
!
WARNING
All settings will return to Factory Defaults. Registration
provisioning will be lost.
A button is located on the side of the Small Form Factor
RESET
ONT. It can be used if the Small Form Factor ONT needs to be
rebooted. Refer to the illustration in
page 3 for the location of this button. To reset the Small Form
Factor ONT, press the
RESET
Installation Overview
To install the Small Form Factor ONT, complete the following
steps:

Step 1: Install the Small Form Factor ONT

Step 2: Connect Ethernet

Step 3: Connect Fiber

Step 4: Connect Power
jobAid
Issue Date: April 2014
Document P/N: 61287564G1-22A
"Step 4: Connect Power"
button for 5 seconds or longer.
on
1