OK
Cancel
Copy axis
Initialize
Help
3. Click [OK] to determine the settings.
Click [OK] to determine the edited settings.
Click [Cancel] to cancel the edited settings.
7.9 Changing Axis Information
Change the used axes or the groups for the setting data being edited.
Select [Set axis] [Change axis] in the menu bar. The following dialog is shown.
Unit type
Axis selection
The editing dialog for the interpolation axis group is shown by clicking [OK] after selecting the
used axes.
Update the parameter settings with the specified contents.
Close this dialog without updating the parameter settings.
Specify the axes of the source and destination to copy the parameter setting
between the axes.The following dialog is shown by clicking the [Copy axis]
button. Specify the axes and click [OK].
Initialize the parameter settings.
Indicate the help for this function.
Select either one of the following unit type according to the model to be used.
- Positioning unit RTEX
- Positioning unit (Interpolation type)
Select the axis to be used.
7-17