Copying Positioining Data; Selecting All Cells - Panasonic FP2-PP2T Technical Manual

7.11.2 Copying Positioining Data

The data contents can be stored in the clipboard by setting the preference field of the cells on the
positioning data editing screen. The data stored in the clipboard are pasted in Microsoft Excel as well
as the data editing screen of this software.
Note:
Pasting is not possible if the content in the clipboard is different from the attributes of the pasted area.
If values are contained in the contents of the clipboard, the values can be pasted up to the maximum
digit number of the data item.
Key Point:
If the pasted area is different from the data in the clipboard, paste as shown below.

7.11.3 Selecting All Cells

All cells can be selected before the operations such as copy or paste are done.
It is convenient to copy all the settings of the specified axis to another axis.
Press [Ctrl] + [A] on the keyboard, or click the [Table No.] header on the upper-left corner of the data
editing screen with the mouse to select all cells.
7-21