8.52
[One-touch tuning Error Code (Obj. 2D54h)]
[One-touch tuning Error Code (Obj. 2D54h: 00h)]
Data Type
Access
U16
RO
Description
An error code of the one-touch tuning is returned.
Refer to "One-touch tuning error" in the following manual.
MR-JET User's Manual (Adjustment)
0000h: Properly completed
C000h: Tuning canceled
C_01h: Overshoot exceeded
C_02h: Servo-off during tuning
C_03h: Control mode error
C_04h: Time-out
C_05h: Load inertia moment ratio misestimated
C_06h: Servo amplifier built-in command start error
C_07h: Servo amplifier built-in command generation error
C_08h: Stop signal
C_09h: Parameter
C_0Ah: Alarm
C00Fh: One-touch tuning disabled
8 Manufacturer Specific Control Object
74
8.52 [One-touch tuning Error Code (Obj. 2D54h)]
Mapping
Default
Impossible
Range
Units
Refer to the
following.
Save
Parameter
Impossible