One-Touch Tuning Error Code (Obj. 2D54H)]; [One-Touch Tuning Error Code (Obj. 2D54H: 00H)] - Mitsubishi Electric Melservo-J5 Series User Manual

8.57

[One-touch tuning Error Code (Obj. 2D54h)]

[One-touch tuning Error Code (Obj. 2D54h: 00h)]

Data Type Access
U16 RO
Description
An error code of the one-touch tuning is returned.
Refer to "One-touch tuning error" in the following manual.
MR-J5 User's Manual (Adjustment)
0000h: Finished normally
C000h: Tuning canceled
C_01h: Overshoot exceeded
C_02h: Servo-off during tuning
C_03h: Control mode error
C_04h: Time-out
C_05h: Load to motor inertia ratio miscalculated
C_06h: Servo amplifier built-in command start error
C_07h: Servo amplifier built-in command generation error
C_08h: Stop signal
C_09h: Parameter
C_0Ah: Alarm
C00Fh: One-touch tuning disabled
8 Manufacturer Specific Control Object
70
8.57 [One-touch tuning Error Code (Obj. 2D54h)]
Mapping Default

Impossible
Range Units

0000h, C000h to
C00Ah, C00Fh
Save Parameter

Impossible